Sepamatic® 2000 *

Parts and service for use with your Sepamatic® 2000 Soft Separator. Belts, drums, bushings, scraper blades and more.

Check out our Reconditioned Equipment page for machine availability.

Bearing Block Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Eccentric AS. 21.200.00.148.03 SP288
#02 Bearing SP039
#03 Pressure Piece 417.02.00.451.00 SP041
#04 Cap Screw - M6 X 10 SP040
#05 Retainer SP034
#06 Seal - 90 X 110 X 10 SP038
#07 Spindle Assembly SP033
#08 Ring, Retaining SP036
#09 Bearing BA760
#10 Fitting, Grease SP044
#11 Housing SP032
#12 Seal - 80X100X10 SP037
#13 Ring, Spacer SP056
#14 Washer 21.200.00.036.04 SP057
#15 Slide Guide Assembly 21.200.00.098.03 SP031

Carraige Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Roller 21.200.00.024.02 SP047
#02 Plate, Outer 21.200.00.052.02 SP019
#03 Bushing 21.200.00.010.04 SP021
#04 Roller, Bottom Right (4.88\" Od) 21.200.00.051.03 BA583
#05 Roller, Bottom Center (4.60\" Od) 21.200.00.050.03 BA588
#06 Roller, Drive 21.200.00.096.01 SP049
#07 Plate, Inner 21.200.00.052.02 SP020
#08 Plate, Inner SP060
#09 Shaft, Large SP062
#10 Roller (2.56 Od) SP067
#11 Plate, Outer SP059
#12 Roller, Small SP066
#13 Shaft, Small SP064
#14 Set Screw (M10 X 25MM) SP063

Door Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Front Plate Assembly 21.200.00.142.00 SP050
#02 Nut, Circular 21.200.00.127.03 SP027
#03 Plate, Roller Support SP087
#04 Eccentric Assembly 212.00.0014.83 SP288
#05 Plate, Bearing Adjuster 212.00.00150.14 SP103
#06 Flange, Eccentric SP085
#07 Plate SP088
#08 Worm TPM DESIGN SP091
#09 Spacer Plate Set SP075
#09A Individual Spacer Plate, Lower RH SP043
#09B Individual Spacer Plate - Upper LH SP045
#09C Individual Spacer Plate - Upper RH SP046
#10 Nut, Circular 21.200.00.126.04 BA536
#11 Discharge Chute 21.200.00.245.14 SP052
#12 Drive V-belt 407.17.5515.119 SP074

Drum & Belt Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Bushing BA534
#02 Drum Flange 21.200.00.087.01 BA533
#03 Drum Flange Ring BA532
#04 Ring 21.200.00.081.02 BA523
#05 O-ring 430.20.342.08.00 BA756
#06 Threaded Ring/Flange 21.200.00.083.01 BA525
#07 Nut, Locking 21.200.00.037.04 SP048
#08 Chute AS., Discharge SP086
#09 Key BA526
#10 Drum, 1.3MM BA501
#11 Drum, 2MM BA502
#12 Drum, 3MM BA503
#13 Drum, 5MM BA505
#14 Drum, 1.3MM Heat Treated BA601
#15 Drum, 2MM Heat Treated BA602
#16 Drum, 3MM Heat Treated BA603
#17 Drum, 5MM Heat Treated BA605
#18 Belt (Rubber-molded Edge) BA549
#19 Belt - Deboning (Urethane) BA550
#20 Belt (Volta) BA554

Knife Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Plate Spring BA638
#02 Bushing Nut BA537
#03 Blade Holder 21.200.00.108.02 BA530
#04 Axle 21.200.00.109.03 SP069
#05 Flat Screw BA538
#06 Scraper Blade - 40 Degree Long Wear 21.200.00.110.03 SP001
#06 Scraper Blade Mid 40 Degrees SP323
#07 Knife Guide SP068
#08 Knife Carrier Support Assembly BA723

Shaft Bearing Assembly

Description
OEM Part #
TPM Part #
Add to Quote Cart
#01 Shaft Assembly 21.200.00.026.02 BA521
#02 Shaft Assembly 21.200.00.027.02 BA528
#03 Axle 21.200.00.023.03 SP051
#04 Drive Shaft AS., Drum 21.200.50.000.00 SP023
#05 Shaft AS. 21.200.00.025.02 BA520
#06 Shaft AS., Drive Roller 21.200.51.000.00 SP022
#07 Sealing Ring, Shaft BA752
#08 Bearing BA761
#09 Sealing Ring, Shaft BA751
#10 Bearing BA760
#11 Seal SP029
#12 V-ring (VS170) BA718
#13 V-ring (VS50) BA715
#14 V-ring (VA220) BA719
#15 V-ring (VA250) BA720
#16 Ring, Seal Retainer BA614
#17 Chain Drive 21.200.00.054.23 SP100

Disclaimer:

*Notice: All Brand Names, Product names or trademarks belong to their respective owners. Unless specifically stated otherwise, Thomas Precision Machining Inc (TPM) has no association or affiliation with any entities listed here on. Sepamatic®, is trademark and/or service mark of its owner, which does not sponsor or endorse this site or any products or services offered here. Thomas Precision, Inc. has no association or affiliation with Sepamatic® or its products or services.